Membrane Diffuser

Details:

• The AFD350 5(m3/h) 12-inch Fine Bubble PTFE Coated EPDM Membranes are specialized aeration membranes used in wastewater treatment systems, particularly for fine bubble aeration. These membranes combine high-performance materials to offer superior durability, efficiency, and resistance in demanding wastewater treatment applications.
• Standard oxygen transfer efficiencies of up to 3.3%/ft (11%/m) are achievable under extreme circumstances, however a more typical and practical value is 2.3 to 2.5%/ft (7.5 to 8.0%/m). When high SOTEs are combined with low headloss, it is possible to achieve SAE, wire-to-water of in excess of 8 lb/HP-hr (5 kgO2/kWh).

Features:-

• Highest possible qualit y and technology means years of trouble free efficient operation.
• Highest possible SOTE independently tested per ASCE and lowest possible head loss.
• Industry Standard Size and Shape. Membranes are interchangeable with 3 other manufacturers.
• Experienced Engineering and Drafting staff with years of practice to assist you.
• Simple and quick installation with QC Saddle or Grommet.
• 212 F (100 C) temperature resistance and environmentally friendly polypropylene body.
• Compression-molded membranes with individual thermocouples in each cavity = 100% quality control.
• Each membrane checked for even perforation depth to ensure uniform air release.
• Low membrane plasticizers content to reduce shrinkage and hardening, but enough to avoid creep.
• Multiple integral check valves keep your aeration piping system clean.
• 21st century-special materials, such as PTFE, FEPDM as well as reinforced and coated ultra fine bubble membranes for outstanding chemical or fouling resistance, or for the highest oxygen transfer efficiency at a head loss you can live with.
• In stock on 3 continents in 4 locations.

1(m3/h) PTFE Coated EPDM Membranes Diffuser combine two materials—EPDM (Ethylene Propylene Diene Monomer) and PTFE (Polytetrafluoroethylene)—to offer superior performance, particularly in demanding environments. These membranes are commonly used in various industrial applications where durability, resistance to chemicals, and long service life are essential.

SSI Aeration, Inc. creates multi-layer PTFE membranes that reduce scaling, fouling and cleaning frequency. As the worldwide choice of PTFE membrane manufacturer, we always work toward engineering the next development in membrane technology.

PTFE membranes from SSI have a long reputation for improving fouling resistance and the need for cleaning. Compared to standard EPDM membranes from leading manufacturers, these PTFE membranes can improve on these aspects by a factor of five to 10.

• A 3(m3/h) Fine Bubble Membrane Diffuser is a device used in wastewater treatment, aquaculture, and other industrial applications to efficiently distribute air or oxygen in the form of fine bubbles. Fine bubble diffusers are designed to create bubbles that are smaller in size compared to coarse bubble diffusers, which increases the surface area for oxygen transfer and maximizes efficiency in biological treatment processes.